Administrator Guide
interface GigabitEthernet 2/2
no ip address
ipv6 address 3:4:5:6::8/24
shutdown
Dell#
Clearing IPv6 Routes
To clear routes from the IPv6 routing table, use the following command.
• Clear (refresh) all or a specic route from the IPv6 routing table.
EXEC mode
clear ipv6 route {* | ipv6 address prefix-length}
• *: all routes.
• ipv6 address: the format is x:x:x:x::x.
• mask: the prex length is from 0 to 128.
NOTE: IPv6 addresses are normally written as eight groups of four hexadecimal digits, where each group is separated by a
colon (:). Omitting zeros is accepted as described in Addressing.
Secure Shell (SSH) Over an IPv6 Transport
Dell Networking OS supports IPv6 secure shell (SSH).
The Dell Networking OS supports both inbound and outbound SSH sessions using IPv6 addressing. Inbound SSH supports accessing the
system through the management interface as well as through a physical Layer 3 interface.
For SSH conguration details, refer to the Security chapter in the Dell Networking OS Command Line Interface Reference Guide.
IPv6 Routing
417