Users Guide

• 0 (zero) for an unecrypted (clear text) password

• 7 (seven) for a hidden text password

password Enter a string up to 40 characters as the password.

Defaults Not congured.

Command Modes CONFIGURATION

Supported Modes Full–Switch

Command History

Version Description

9.9(0.0) Introduced on the FN IOM.

8.3.16.1 Introduced on the MXL 10/40GbE Switch IO Module.

Usage Information The password is listed in the conguration le; you can view the password by entering the show running-

config ftp command in EXEC mode.

Use the ip ftp password command when you use the ftp: parameter in the copy command.

Related Commands

copy — copy les.

ftp-server username — sets the user name for the FTP sessions.

ip ftp source-interface

Specify an interface’s IP address as the source IP address for FTP connections.

Syntax

ip ftp source-interface interface

Parameters

interface Enter the following keywords and slot/port or number information:

• For Loopback interfaces, enter the keyword loopback then a number from zero (0)

to 16383.

• For a Port Channel interface, enter the keywords port-channel then a number.

The range is from 1 to 128.

•

For a 10-Gigabit Ethernet interface, enter the keyword TenGigabitEthernet then

the slot/port information.

• For a VLAN interface, enter the keyword vlan then a number from 1 to 4094.

Defaults The IP address on the system that is closest to the Telnet address is used in the outgoing packets.