Users Guide

Prefix Cost Nexthop Interface Area Type
1.1.1.1 1 0.0.0.0 Lo 0 0 Intra-Area
3.3.3.3 2 13.0.0.3 Te 0/4 1 Intra-Area
13.0.0.0 1 0.0.0.0 Te 0/4 0 Intra-Area
150.150.150.0 2 13.0.0.3 Te 0/4 - External
172.30.1.0 2 13.0.0.3 Te 0/4 1 Intra-Area
Dell#
show ip ospf statistics
Display OSPF statistics.
Syntax
show ip ospf process-id statistics global | [interface name {neighbor router-
id}]
Parameters
process-id Enter the OSPF Process ID to show a specic process. If no Process ID is entered,
command applies only to the rst OSPF process.
global Enter the keyword global to display the packet counts received on all running OSPF
interfaces and packet counts OSPF neighbors receive and transmit.
interface name (OPTIONAL) Enter the keyword interface then one of the following interface
keywords and slot/port or number information:
• For Port Channel groups, enter the keywords port-channel then a number. The
range is from 1 to 128.
•
For a 10-Gigabit Ethernet interface, enter the keyword TenGigabitEthernet then
the slot/port information.
• For a VLAN, enter the keyword vlan then a number from 1 to 4094.
neighbor router-id (OPTIONAL) Enter the keyword neighbor then the neighbor’s router-id in dotted
decimal format (A.B.C.D.).
Defaults none
Supported Modes Full–Switch
Command Modes
• EXEC
• EXEC Privilege
Command History
Version Description
9.9(0.0) Introduced on the FN IOM.
8.3.16.1 Introduced on the MXL 10/40GbE Switch IO Module.
Usage Information The following describes the show ip ospf statistics process-id global command shown in the
following example.
Row Heading Description
Total Displays the total number of packets the OSPF process receives/transmits.
Error Displays the error count while receiving and transmitting packets by the OSPF process.
Hello Number of OSPF Hello packets.
962 Open Shortest Path First (OSPFv2 and OSPFv3)