Users Guide

• Save passive-interface interface into the running conguration.
passive-interface default
• All present and future OSPF interfaces are marked as passive.
• Any adjacency is explicitly terminated from all OSPF interfaces.
• All previous passive-interface interface commands are removed from the running conguration.
• All previous no passive-interface interface commands are removed from the running
conguration.
no passive-interface interface
• Remove the interface from the passive list.
• The ABR status for the router is updated.
• If passive-interface default is specied, then save no passive-interface interface into
the running conguration.
No passive-interface default
• Clear everything and revert to the default behavior.
• All previously marked passive interfaces are removed.
• May update ABR status.
redistribute
Redistribute information from another routing protocol throughout the OSPF process.
Syntax
redistribute {connected | rip | static} [metric metric-value | metric-type
type-value] [route-map map-name] [tag tag-value]
To disable redistribution, use the no redistribute {connected | isis | rip | static} command.
Parameters
connected Enter the keyword connected to specify that information from active routes on
interfaces is redistributed.
rip Enter the keyword rip to specify that RIP routing information is redistributed.
static Enter the keyword static to specify that information from static routes is redistributed.
metric metric-value (OPTIONAL) Enter the keyword metric then a number. The range is from 0 (zero) to
16777214.
metric-type type-
value
(OPTIONAL) Enter the keywords metric-type then one of the following:
• 1 = OSPF External type 1
• 2 = OSPF External type 2
route-map map-
name
(OPTIONAL) Enter the keywords route-map then the name of the route map.
tag tag-value (OPTIONAL) Enter the keyword tag then a number. The range is from 0 to 4294967295.
Defaults Not congured.
Command Modes ROUTER OSPF
Open Shortest Path First (OSPFv2 and OSPFv3) 939