Users Guide

Command History
Version Description
9.9(0.0) Introduced on the FN IOM.
8.3.16.1 Introduced on the MXL 10/40GbE Switch IO Module.
ip ospf network
Set the network type for the interface.
Syntax
ip ospf network {broadcast | point-to-point}
To return to the default, use the no ip ospf network command.
Parameters
broadcast Enter the keyword broadcast to designate the interface as part of a broadcast
network.
point-to-point Enter the keywords point-to-point to designate the interface as part of a point-to-
point network.
Defaults Not congured.
Command Modes ROUTER OSPF
Supported Modes Full—Switch
Command History
Version Description
9.9(0.0) Introduced on the FN IOM.
8.3.16.1 Introduced on the MXL 10/40GbE Switch IO Module.
ip ospf priority
To determine the designated router for the OSPF network, set the priority of the interface.
Syntax
ip ospf priority number
To return to the default setting, use the no ip ospf priority command.
Parameters
number Enter a number as the priority. The range is from 0 to 255. The default is 1.
Defaults 1
Command Modes INTERFACE
Supported Modes Full—Switch
Command History
Version Description
9.9(0.0) Introduced on the FN IOM.
8.3.16.1 Introduced on the MXL 10/40GbE Switch IO Module.
934 Open Shortest Path First (OSPFv2 and OSPFv3)