Users Guide

• inter-area dist2 = 110
• intra-area dist1 = 110
Command Modes ROUTER OSPF
Supported Modes Full—Switch
Command History
Version Description
9.9(0.0) Introduced on the FN IOM.
8.3.16.1 Introduced on the MXL 10/40GbE Switch IO Module.
Usage Information To specify a distance for routes learned from other routing domains, use the redistribute command.
distribute-list in
Apply a lter to incoming routing updates from OSPF to the routing table.
Syntax
distribute-list prefix-list-name in [interface]
To delete a lter, use the no distribute-list prefix-list-name in [interface] command.
Parameters
prex-list-name Enter the name of a congured prex list.
interface (OPTIONAL) Enter one of the following keywords and slot/port or number information:
• For Port Channel groups, enter the keywords port-channel then a number. The
range is from 1 to 128.
• For a 10-Gigabit Ethernet interface, enter the keyword TenGigabitEthernet then
the slot/port information.
•
For a VLAN, enter the keyword vlan then a number from 1 to 4094.
Defaults Not congured.
Command Modes ROUTER OSPF
Supported Modes Full—Switch
Command History
Version Description
9.9(0.0) Introduced on the FN IOM.
8.3.16.1 Introduced on the MXL 10/40GbE Switch IO Module.
distribute-list out
To restrict certain routes destined for the local routing table after the SPF calculation, apply a lter.
Syntax
distribute-list prefix-list-name out [bgp | connected | isis | rip | static]
To remove a lter, use the no distribute-list prefix-list-name out [bgp | connected |
isis | rip | static] command.
926 Open Shortest Path First (OSPFv2 and OSPFv3)