Users Guide

Defaults cost = 1; no areas are congured.
Command Modes ROUTER OSPF
Supported Modes Full—Switch
Command History
Version Description
9.9(0.0) Introduced on the FN IOM.
8.3.16.1 Introduced on the MXL 10/40GbE Switch IO Module.
Usage Information In the Dell Networking operating software, cost is dened as reference bandwidth.
Related Commands area stub — creates a stub area.
area nssa
Specify an area as a not so stubby area (NSSA).
Syntax
area area-id nssa [default-information-originate] [no-redistribution] [no-
summary]
To delete an NSSA, use the no area area-id nssa command.
Parameters
area-id Specify the OSPF area in dotted decimal format (A.B.C.D.) or enter a number from zero
(0) to 65535.
no-redistribution (OPTIONAL) Specify that the redistribute command does not distribute routes into
the NSSA. Only use this command in an NSSA area border router (ABR).
default-information-
originate
(OPTIONAL) Allows external routing information to be imported into the NSSA by using
Type 7 default.
no-summary (OPTIONAL) Specify that no summary LSAs should be sent into the NSSA.
Defaults Not congured.
Command Modes ROUTER OSPF
Supported Modes Full—Switch
Command History
Version Description
9.9(0.0) Introduced on the FN IOM.
8.3.16.1 Introduced on the MXL 10/40GbE Switch IO Module.
area range
Summarize routes matching an address/mask at an area border router (ABR).
Syntax
area area-id range ip-address mask [not-advertise]
To disable route summarization, use the no area area-id range ip-address mask command.
918 Open Shortest Path First (OSPFv2 and OSPFv3)