Users Guide

Version Description
9.2(0.0) Introduced on the MXL 10/40GbE Switch IO Module.
debug ip msdp
Turn on MSDP debugging.
Syntax
debug ip msdp {event peer address | packet peer address | pim}
To turn debugging o, use the no debug ip msdp {event peer address | packet peer address
| pim} command.
Parameters
event peer address Enter the keyword event then the peer address in a dotted decimal format (A.B.C.D.).
packet peer
address
Enter the keyword packet then the peer address in a dotted decimal format (A.B.C.D.).
pim Enter the keyword pim to debug advertisement from PIM.
Defaults Not congured.
Command Modes EXEC Privilege
Supported Modes Full–Switch
Command History
Version Description
9.9(0.0) Introduced on the FN IOM.
9.2(0.0) Introduced on the MXL 10/40GbE Switch IO Module.
ip msdp cache-rejected-sa
Enable an MSDP cache for the rejected source-active entries.
Syntax
ip msdp cache-rejected-sa {number}
To clear the MSDP rejected source-active entries, use the no ip msdp cache-rejected-sa {number}
command then the ip msdp cache-rejected-sa {number} command.
Parameters
number Enter the number of rejected SA entries to cache. The range is from 0 to 32766.
Defaults none
Command Modes CONFIGURATION
Version 9.2(0.0) Introduced on the MXL 10/40GbE Switch IO Module.
Supported Modes Full–Switch
Command History
Version Description
9.9(0.0) Introduced on the FN IOM.
866 Multicast Source Discovery Protocol (MSDP)