Users Guide

advertise med video-conferencing
To advertise dedicated video conferencing and other similar appliances that support real-time interactive video, congure the system.
Syntax
advertise med video-conferencing {vlan-id} | {priority-tagged number}
To return to the default, use the no advertise med video-conferencing {vlan-id} |
{priority-tagged number} command.
Parameters
vlan-id Enter the VLAN ID. The range is from 1 to 4094.
priority-tagged
number
Enter the keywords priority-tagged then the Layer 2 priority. The range is from 0 to
7.
Defaults uncongured.
Command Modes CONFIGURATION (conf-lldp)
Supported Modes Full-Switch
Command History
9.9(0.0) Introduced on the FN IOM.
Version 8.3.16.1 Introduced on the MXL 10/40GbE Switch IO Module.
Related Commands
debug lldp interface — debugs LLDP.
show lldp neighbors — displays the LLDP neighbors.
show running-cong lldp — displays the LLDP running conguration.
advertise med voice-signaling
To advertise when voice control packets use a separate network policy than voice data, congure the system.
Syntax
advertise med voice-signaling {vlan-id} | {priority-tagged number}
To return to the default, use the no advertise med voice-signaling {vlan-id} | {priority-
tagged number} command.
Parameters
vlan-id Enter the VLAN ID. The range is from 1 to 4094.
priority-tagged
number
Enter the keywords priority-tagged then the Layer 2 priority. The range is from 0 to
7.
Defaults uncongured.
Command Modes CONFIGURATION (conf-lldp)
Supported Modes Full-Switch
Command History
9.9(0.0) Introduced on the FN IOM.
Link Layer Discovery Protocol (LLDP) 857