Manualshelf

Users Guide

ManualsBrandsDell ManualsAccess PlatformsFN IO Module
831832833834835836837838839840
default-vlan disable
Disable the default VLAN so that all switchports are placed in the Null VLAN until they are explicitly congured as a member of another
VLAN.
Defaults Enabled.
Command Modes CONFIGURATION
Supported Modes Full–Switch
Command History
Version Description
9.9(0.0) Introduced on the FN IOM.
8.3.16.1 Introduced on the MXL 10/40GbE Switch IO Module.
Usage Information The no default vlan disable command is not listed in the running-conguration, but when the default
VLAN is disabled, default-vlan disable is listed in the running-conguration.
name
Assign a name to the VLAN.
Syntax
name vlan-name
To remove the name from the VLAN, use the no name command.
Parameters
vlan-name Enter up to 32 characters as the name of the VLAN.
Defaults Not congured.
Command Modes INTERFACE VLAN
Supported Modes Full–Switch
Command History
Version Description
9.9(0.0) Introduced on the FN IOM.
8.3.16.1 Introduced on the MXL 10/40GbE Switch IO Module.
Usage Information To display information about a named VLAN, enter the show vlan command with the name parameter or the
show interfaces description command.
Related Commands
description — assigns a descriptive text string to the interface.
interface vlan — congures a VLAN.
show vlan — displays the current VLAN congurations on the switch.
Layer 2 837