Users Guide
To remove the description from the VLAN, use the no description command.
Parameters
description Enter a text string description to identify the VLAN (80 characters maximum).
Defaults none
Command Modes INTERFACE VLAN
Supported Modes All Modes
Command History
Version Description
9.9(0.0) Introduced on the FN IOM.
9.4(0.0) Supported on the FN I/O Aggregator.
8.3.17.0 Supported on the M I/O Aggregator.
Related Commands show vlan – displays the VLAN conguration.
default vlan-id
Specify a VLAN as the Default VLAN.
Syntax
default vlan-id vlan-id
To remove the default VLAN status from a VLAN and VLAN 1 does not exist, use the no default vlan-id
vlan-id syntax.
Parameters
vlan-id Enter the VLAN ID number of the VLAN to become the new Default VLAN. The range is
from 1 to 4094. The default is 1.
Defaults The Default VLAN is VLAN 1.
Command Modes CONFIGURATION
Supported Modes Full–Switch
Command History
Version Description
9.9(0.0) Introduced on the FN IOM.
8.3.16.1 Introduced on the MXL 10/40GbE Switch IO Module.
Usage Information
To return VLAN 1 as the Default VLAN, use the (default-vlan-id 1) command.
The Default VLAN contains only untagged interfaces.
Related Commands interface vlan — congures a VLAN.
836 Layer 2