Users Guide

TenGig 0/1 200 200 0 0 0 0
Dell#
Related Commands
clear lacp counters — Clears the LACP counters.
show interfaces port-channel — Displays the information on congured Port Channel groups.
show link-bundle-distribution port-channel
Display the trac-handling and utilization of the member interfaces of the port channel.
Syntax
show link-bundle-distribution port-channel
Command Modes
EXEC
EXEC Privilege
Supported Modes All Modes
Command History
Version Description
9.9(0.0) Introduced on the FN IOM.
9.4(0.0) Supported on the FN I/O Aggregator.
Usage Information The following table describes the output elds of this show command:
Field Description
Link-bundle trigger
threshold
Threshold value that is the checkpoint, exceeding which the link bundle is marked as
being overutilized and alarm is generated
LAG bundle number Number of the LAG bundle
Utilization (In
Percent)
Trac usage in percentage of the packets processed by the port channel
Alarm State Indicates whether an alarm is generated if overutilization of the port channel occurred.
Possible values are Active and Inactive
Interface Slot and port number, and the type of the member interface of the port channel
Line Protocol Indicates whether the interface is administratively up or down
Utilization (In
Percent)
Trac usage in percentage of the packets processed by the particular member interface
Example
Dell#show link-bundle-distribution port-channel
Link-bundle trigger threshold - 60
LAG bundle - 1 Utilization[In Percent] - 0 Alarm State - Inactive
Interface Line Protocol Utilization[In Percent]
Te 0/5 Up 0
Link Aggregation Control Protocol (LACP) 823