Users Guide

0–5 Enter the keyword 0–5 to upgrade only the mentioned stack-unit.
all Enter the keyword all to upgrade all the member stack-units.
booted Enter the keyword booted to upgradefrom the current image in the M I/O Aggregator.
ftp: After entering the keyword ftp:, you can either follow it with the location of the source
le in this form: //userid:password@hostip/filepath or press Enter to launch a
prompt sequence.
tftp: After entering the keyword tftp:, you can either follow it with the location of the source
le in this form: //hostlocation/filepath or press Enter to launch a prompt
sequence.
ash: After entering the keyword flash:, you can either follow it with the location of the
source le in this form: //filepath or press Enter to launch a prompt sequence.
usbash: After entering the keyword usbflash:, you can either follow it with the location of the
source le in this form: //filepath or press Enter to launch a prompt sequence.
A: Enter this keyword to upgrade the bootash partition A.
B: Enter this keyword to upgrade the bootash partition B.
Defaults none
Command Modes EXEC Privilege
Supported Modes All Modes
Command History
Version Description
9.9(0.0) Introduced on the FN IOM.
9.4(0.0) Supported on the FN I/O Aggregator.
8.3.17.0 Supported on the M I/O Aggregator.
Usage Information
You must reload the Dell Networking OS after executing this command.
Example
Dell#upgrade boot ?
all Upgrade both boot flash image and selector image
bootflash-image Upgrade boot flash image
bootselector-image Upgrade boot selector image
Dell#
upgrade system
Upgrade the bootash image or system image.
Syntax
upgrade system {flash: | ftp: | scp: | tftp: | usbflash: | stack-unit {0-5 |
all} {A: | B:}
Parameters
0–5 Enter the keyword 0–5 to upgrade only the mentioned stack-unit.
all Enter the keyword all to upgrade all the member units of the stack.
File Management 79