Users Guide

Parameters
seconds Interval of transmission time between CSNPs on multi-access networks for the
designated intermediate system. The range is from 0 to 65535. The default is 10.
level-1 (OPTIONAL) Independently congures the interval of time between transmission of
CSNPs for Level 1.
level-2 (OPTIONAL) Independently congures the interval of time between transmission of
CSNPs for Level 2.
Defaults seconds = 10; level-1 (if not otherwise specied)
Command Modes INTERFACE
Supported Modes Full–Switch
Command History
Version Description
9.9(0.0) Introduced on the FN IOM.
9.2(0.0) Introduced on the MXL 10/40GbE Switch IO Module.
Usage Information
The default values of this command are typically satisfactory transmission times for a specic interface on a
designated intermediate system. To maintain database synchronization, the designated routers send CSNPs.
You can congure Level 1 and Level 2 CSNP intervals independently.
isis hello-multiplier
Specify the number of IS-IS hello packets a neighbor must miss before the router declares the adjacency down.
Syntax
isis hello-multiplier multiplier [level-1 | level-2]
To return to the default values, use the no isis hello-multiplier [multiplier] [level-1 |
level-2] command.
Parameters
multiplier Species an integer that sets the multiplier for the hello holding time. Never congure a
hello-multiplier lower than the default (3). The range is from 3 to 1000. The default is 3.
level-1 (OPTIONAL) Select this value to congure the hello multiplier independently for Level 1
adjacencies. This value is the default.
level-2 (OPTONAL) Select this value to congure the hello multiplier independently for Level 2
adjacencies.
Defaults multiplier = 3; level-1 (if not otherwise specied)
Command Modes INTERFACE
Supported Modes Full–Switch
Command History
Version Description
9.9(0.0) Introduced on the FN IOM.
9.2(0.0) Introduced on the MXL 10/40GbE Switch IO Module.
Intermediate System to Intermediate System (IS-IS) 785