Users Guide
Supported Modes Full–Switch
Command History
Version Description
9.9(0.0) Introduced on the FN IOM.
9.2(0.0) Introduced on the MXL 10/40GbE Switch IO Module.
Usage Information
The running router sets the remaining time value to the current adjacency hold time. You can override this setting
by implementing this command.
Override the default restart-wait time by entering the no graceful-restart restart-wait command.
When you disable restart-wait, the current adjacency hold time is used.
Set the t3 timer to adjacency on the restarting router when implementing this command. The restarting router
gets the remaining time value from its peer and adjusts its T3 value so only when you have congured graceful-
restart t3 adjacency
.
Related Commands graceful-restart restart-wait — enables the graceful restart maximum wait time before a restarting peer comes up.
graceful-restart restart-wait
Enable the graceful restart maximum wait time before a restarting peer comes up.
Syntax
NOTE: Set the t3 timer to adjacency on the restarting router when implementing this command.
graceful-restart restart-wait seconds
To return to the default, use the no graceful-restart restart-wait command.
Parameters
seconds Enter the graceful restart time in seconds. The range is from 5 to 300 seconds. The
default is 30 seconds.
Defaults 30 seconds
Command Modes ROUTER ISIS
Supported Modes Full–Switch
Command History
Version Description
9.9(0.0) Introduced on the FN IOM.
9.2(0.0) Introduced on the MXL 10/40GbE Switch IO Module.
Related Commands graceful-restart t3 — congures the overall wait time before graceful restart completes.
hello padding
Use to turn ON or OFF padding for LAN and point-to-point hello PDUs or to selectively turn padding ON or OFF for LAN or point-to-point
hello PDUs.
Syntax
hello padding [multi-point | point-to-point]
780 Intermediate System to Intermediate System (IS-IS)