Users Guide

Parameters

ipv6-address Enter the IPv6 address in the x:x:x:x::x format.

NOTE: The :: notation species successive hexadecimal elds of zeros.

peer-group-name Enter the name of the peer group to set the default route of all routers in that peer group.

route-map map-

name

(OPTIONAL) Enter the keywords route-map then the name of a congured route map.

Defaults Not congured.

Command Modes ROUTER BGPV6-ADDRESS FAMILY

Supported Modes Full–Switch

Command History

Version Description

9.9(0.0) Introduced on the FN IOM.

9.2(0.0) Introduced on the MXL 10/40GbE Switch IO Module.

neighbor distribute-list

Distribute BGP information using an established prex list.

Syntax

neighbor {ipv6-address | peer-group-name} distribute-list prefix-list-name {in

| out}

To delete a neighbor distribution list, use the no neighbor {ipv6-address | peer-group-name}

distribute-list prefix-list-name {in | out} command.

Parameters

ipv6-address Enter the IPv6 address in the x:x:x:x::x format.

NOTE: The :: notation species successive hexadecimal elds of zeros.

peer-group-name Enter the name of the peer group.

prex-list-name Enter the name of an established prex list. If the prex list is not congured, the default

is permit (to allow all routes).

in Enter the keyword in to distribute only inbound trac.

out Enter the keyword out to distribute only outbound trac.