Users Guide

• EXEC Privilege
Supported Modes Full–Switch
Command History
Version Description
9.9(0.0) Introduced on the FN IOM.
9.2(0.0) Introduced on the MXL 10/40GbE Switch IO Module.
show ip bgp ipv6 unicast extcommunity-list
View information on all routes with Extended Community attributes.
Syntax
show ip bgp ipv6 unicast extcommunity-list [list name]
Parameters
list name Enter the extended community list name you wish to view.
Command Modes
• EXEC
• EXEC Privilege
Supported Modes Full–Switch
Command History
Version Description
9.9(0.0) Introduced on the FN IOM.
9.2(0.0) Introduced on the MXL 10/40GbE Switch IO Module.
Usage Information
To view the total number of COMMUNITY attributes found, use the show ip bgp ipv6 unicast summary
command. The text line above the route table states the number of COMMUNITY attributes found.
The show ip bgp ipv6 unicast community command without any parameters lists BGP routes with at
least one BGP community attribute and the output is the same as for the
show ip bgp ipv6 unicast
command output.
show ip bgp ipv6 unicast lter-list
View the routes that match the lter lists.
Syntax
show ip bgp ipv6 unicast filter-list as-path-name
Parameters
as-path-name Enter the name of an AS-PATH.
Command Modes
• EXEC
• EXEC Privilege
Supported Modes Full–Switch
IPv6 Border Gateway Protocol (IPv6 BGP) 723