Users Guide

Parameters
cluster-id (OPTIONAL) Enter the cluster id in dotted decimal format.
Command Modes
• EXEC
• EXEC Privilege
Supported Modes Full–Switch
Command History
Version Description
9.9(0.0) Introduced on the FN IOM.
9.2(0.0) Introduced on the MXL 10/40GbE Switch IO Module.
show ip bgp ipv6 unicast community
View information on all routes with community attributes or view specic BGP community groups.
Syntax
show ip bgp ipv6 unicast community [community-number] [local-as] [no-export]
[no-advertise]
Paramters
community-number Enter the community number in AA:NN format where AA is the AS number (2 bytes) and
NN is a value specic to that autonomous system. You can specify up to eight community
numbers to view information on those community groups.
local-AS Enter the keywords local-AS to view all routes with the COMMUNITY attribute of
NO_EXPORT_SUBCONFED. All routes with the NO_EXPORT_SUBCONFED
(0xFFFFFF03) community attribute must not be advertised to external BGP peers.
no-advertise Enter the keywords no-advertise to view all routes containing the well-known
community attribute of NO_ADVERTISE. All routes with the NO_ADVERTISE
(0xFFFFFF02) community attribute must not be advertised to other BGP peers.
no-export Enter the keywords no-export to view all routes containing the well-known community
attribute of NO_EXPORT. All routes with the NO_EXPORT (0xFFFFFF01) community
attribute must not be advertised outside a BGP confederation boundary.
Command Modes
• EXEC
• EXEC Privilege
Supported Modes Full–Switch
Command History
Version Description
9.9(0.0) Introduced on the FN IOM.
9.2(0.0) Introduced on the MXL 10/40GbE Switch IO Module.
Usage Information To view the total number of COMMUNITY attributes found, use the show ip bgp ipv6 unicast summary
command. The text line above the route table states the number of COMMUNITY attributes found.
IPv6 Border Gateway Protocol (IPv6 BGP) 721