Users Guide

show ip bgp ipv6 unicast peer-group — views BGP peers.
show ip bgp ipv6 unicast neighbors — views BGP neighbors congurations.
neighbor peer-group (creating group)
Allows you to create a peer group and assign it a name.
Syntax
neighbor peer-group-name peer-group
To delete a peer group, use the no neighbor peer-group-name peer-group command.
Parameters
peer-group-name Enter a text string up to 16 characters long as the name of the peer group.
Defaults Not congured.
Command Modes ROUTER BGP
Supported Modes Full–Switch
Command History
Version Description
9.9(0.0) Introduced on the FN IOM.
9.2(0.0) Introduced on the MXL 10/40GbE Switch IO Module.
Usage Information When a peer group is created, it is disabled (shut mode).
Related Commands
neighbor peer-group (assigning peers) — assigns routers to a peer group.
neighbor remote-as — assigns a indirectly connected AS to a neighbor or peer group.
neighbor shutdown — disables a peer or peer group.
neighbor peer-group passive
Enable passive peering on a BGP peer group; that is, the peer group does not send an OPEN message, but does respond to one.
Syntax
neighbor peer-group-name peer-group passive
To delete a passive peer-group, use the no neighbor peer-group-name peer-group passive
command.
Parameters
peer-group-name Enter a text string up to 16 characters long as the name of the peer group.
Defaults Not congured.
Command Modes ROUTER BGP
Supported Modes Full–Switch
IPv6 Border Gateway Protocol (IPv6 BGP) 707