Users Guide

peer-group-name Identify a peer group by name.

activate Enter the keyword activate to enable the identied neighbor or peer group in the new

AFI/SAFI.

Defaults Disabled.

Command Modes ROUTER BGPV6-ADDRESS FAMILY

Supported Modes Full–Switch

Command History

Version Description

9.9(0.0) Introduced on the FN IOM.

9.2(0.0) Introduced on the MXL 10/40GbE Switch IO Module.

Usage Information By default, when you create a neighbor/peer group conguration in the Router BGP context, it is enabled for the

IPv6/Unicast AFI/SAFI. By using activate in the new context, the neighbor/peer group is enabled for AFI/SAFI.

neighbor advertisement-interval

Set the advertisement interval between BGP neighbors or within a BGP peer group.

Syntax

neighbor {ipv6-address | peer-group-name} advertisement-interval seconds

To return to the default value, use the no neighbor {ipv6-address | peer-group-name}

advertisement-interval command.

Parameters

ipv6-address Enter the IPv6 address in the x:x:x:x::x format.

NOTE: The :: notation species successive hexadecimal elds of zeros.

peer-group-name Enter the name of the peer group to set the advertisement interval for all routers in the

peer group.

seconds Enter a number as the time interval, in seconds, between BGP advertisements. The range

is from 0 to 600 seconds. The default is 5 seconds for internal BGP peers and 30

seconds for external BGP peers.

Defaults

• seconds = 5 seconds (internal peers)