Users Guide

via 100::1, Te 0/8, 00:00:50
L fe80::/10 [0/0]
Direct, Nu 0, 20:00:18
Dell#
Example (Summary)
Dell#show ipv6 route summary
Route Source Active Routes Non-active Routes
connected 3 0
static 1 0
Total 4 0
Total 4 active route(s) using 928 bytes
Dell#
trust ipv6-diserv
Allows the dynamic classication of IPv6 DSCP.
Syntax
trust ipv6-diffserv
To remove the denition, use the no trust ipv6-diffserv command.
Defaults none
Command Modes CONFIGURATION-POLICY-MAP-IN
Supported Modes Full–Switch
Command History
Version Description
9.9(0.0) Introduced on the FN IOM.
9.2(0.0) Introduced on the MXL 10/40GbE Switch IO Module.
Usage Information
When you congure trust IPv6 diserv, matched bytes/packets counters are not incremented in the show qos
statistics command.
Trust diserv (IPv4) can co-exist with trust ipv6-diserv in an Input Policy Map. Dynamic classication happens
based on the mapping as shown:
IPv6 Service
Class Field
Queue ID
111XXXXX 7
110XXXXX 6
101XXXXX 5
100XXXXX 4
011XXXXX 3
010XXXXX 2
001XXXXX 1
000XXXXX 0
672 IPv6 Basics