Users Guide

Parameters
name Enter the name of the host to delete. Enter * to delete all host table entries.
inbound Specify the inbound session key for IPSec.
outbound Specify the outbound session key for IPSec.
ah Use the AH protocol when you select the AH transform set in the crypto policy.
esp Use the ESP protocol when you select the ESP transform set in the crypto policy.
spi Enter the security parameter index number.
hex-key-string Enter the session key in hex format (a string of 8, 16, or 20 bytes). For DES algorithms,
specify at least 16 bytes per key. For SHA algorithms, specify at least 20 bytes per key.
encrypt Indicates the ESP encryption transform set key string.
auth Indicates the ESP authentication transform set key string.
Defaults none
Command Modes CONF-CRYPTO-POLICY
Supported Modes Full–Switch
Command History
Version Description
9.9(0.0) Introduced on the FN IOM.
9.2(0.0) Introduced on the MXL 10/40GbE Switch IO Module.
Usage Information
• This command is only available in the ipsec-manual model.
• The key information entry is associated with the global method for enabling clear text or encrypted display in
the running cong.
show crypto ipsec transform-set
Display the transform set conguration.
Syntax
show crypto ipsec transform-set name
Parameters
name Enter the name of the transform set.
Command Modes EXEC
Supported Modes Full–Switch
Command History
Version Description
9.9(0.0) Introduced on the FN IOM.
9.2(0.2) Introduced on the MXL 10/40GbE Switch IO Module.
Example
Dell(conf)#do show crypto ipsec transform-set
Transform-Set Name : ts1
Transform-Set refCnt : 0
AH Transform : md5
ESP Auth Transform :
Internet Protocol Security (IPSec) 643