Users Guide

show arp retries
Display the congured number of ARP retries.
Syntax
show arp retries
Command Modes
• EXEC
• EXEC Privilege
Supported Modes Full–Switch
Command History
Version Description
9.9(0.0) Introduced on the FN IOM.
8.3.16.1 Introduced on MXL 10/40GbE Switch IO Module
Related Commands
arp retries — sets the number of ARP retries in case the system does not receive an ARP reply in response to an
ARP request.
show hosts
View the host table and DNS conguration.
Syntax
show hosts
Command Modes
• EXEC
• EXEC Privilege
Supported Modes Full–Switch
Command History
Version Description
9.9(0.0) Introduced on the FN IOM.
8.3.16.1 Introduced on the MXL 10/40GbE Switch IO Module.
Usage Information The following describes the show hosts command in the following example.
Field Description
Default domain... Displays the domain name (if congured).
Name/address
lookup...
States if DNS is enabled on the system.
• If DNS is enabled, the Name/Address lookup is domain service.
• If DNS is not enabled, the Name/Address lookup is static mapping
Name servers are... Lists the name servers, if congured.
Host Displays the host name assigned to the IP address.
Flags Classies the entry as one of the following:
IPv4 Routing 623