Users Guide

Command History
Version Description
9.9(0.0) Introduced on the FN IOM.
8.3.16.1 Introduced on the MXL 10/40GbE Switch IO Module.
Example
Dell#show ip udp-helper
--------------------------------------------------
Port UDP port list
--------------------------------------------------
Te 1/1 656, 658
Te 1/2 All
Related Commands
debug ip udp-helper — enables debug and displays the debug information on a console.
ip udp-broadcast-address — congures a UDP IP address for broadcast.
ip udp-helper udp-port — enables the UDP broadcast feature on an interface either for all UDP ports or a
specied list of UDP ports.
Port Interface Commands
The following commands are for physical, loopback, and null interfaces:
• clear counters
• clear mac-address-table dynamic
• interface range
• interface vlan
• keepalive
• name
• show cong (INTERFACE mode)
• show cong (from INTERFACE RANGE mode)
• show cong (from INTERFACE VLAN mode)
• show interfaces congured
• show interfaces description
• show interfaces stack-unit
• show interfaces port-channel
• show interfaces status
• show interfaces switchport
• show vlan
• shutdown
• speed (for 1000/10000 interfaces)
Virtual LAN (VLAN) Commands
The following commands congure and monitor virtual local area networks (VLANs). VLANs are a virtual interface and use many of the
same commands as physical interfaces.
You can congure an IP address only on the default VLAN. FTP, TFTP, ACLs, and SNMP are not supported on a VLAN.
588
Interfaces