Users Guide
9.2(0.0) Introduced on the MXL 10/40GbE Switch IO Module.
Usage Information Because the resilient ring protocol can potentially transmit 20 packets per interface, restrict debug information.
description
Enter an identifying description of the ring.
Syntax
description Word
To remove the ring description, use the no description [Word] command.
Parameters
Word Enter a description of the ring. Maximum: 255 characters.
Defaults none
Command Modes CONFIGURATION (conf-frrp)
Supported Modes Full–Switch
Command History
Version Description
9.9(0.0) Introduced on the FN IOM.
9.2(0.0) Introduced on the MXL 10/40GbE Switch IO Module.
disable
Disable the resilient ring protocol.
Syntax
disable
To enable the Resilient Ring Protocol, use the no disable command.
Defaults Disabled
Command Modes CONFIGURATION (conf-frrp)
Supported Modes Full–Switch
Command History
Version Description
9.9(0.0) Introduced on the FN IOM.
9.2(0.0) Introduced on the MXL 10/40GbE Switch IO Module.
interface
Congure the primary, secondary, and control-vlan interfaces.
Syntax
interface {primary interface secondary interface control-vlan vlan-id}
Force10 Resilient Ring Protocol (FRRP) 507