Users Guide

dcbx-port role
dcbx version
debug dcbx
description
fc-map
fcoe-map
fcoe priority-bits
iscsi priority-bits
keepalive
interface vlan (NPIV proxy gateway)
pfc mode on
pfc no-drop queues
priority
priority-group bandwidth pfc
priority-pgid
qos-policy-output ets
qos-policy-buer
priority-list
scheduler
show dcb
show interface dcbx detail
show interface ets
show interface pfc
show interface pfc statistics
show qos priority-groups
show qos dcb-map
show stack-unit stack-ports ets details
dcb pfc-shared-buer-size
dcb pfc-total-buer-size
dcb-buer-threshold
dcb enable pfc-queues
dcb {ets | pfc} enable
service-class buer shared-threshold-weight
show stack-unit stack-ports pfc details
advertise dcbx-appln-tlv
On a DCBX port with a manual role, congure the application priority TLVs advertised on the interface to DCBX peers.
Syntax
advertise dcbx-appln-tlv {fcoe | iscsi}
To remove the application priority TLVs, use the no advertise dcbx-appln-tlv {fcoe | iscsi}
command.
Parameters
{fcoe | iscsi} Enter the application priority TLVs, where:
fcoe: enables the advertisement of FCoE in application priority TLVs.
Data Center Bridging (DCB) 401