Users Guide

Defaults
Enabled
Parameters
threshold default
Enter the keyword default for CAM usage threshold for notication of the CAM usage
through syslog message. The default threshold value is 90 percent.
threshold
threshold-percent
Enter the threshold percent for notication of the CAM usage through syslog message.
The range is from 1 to 100 percent.
silence-period
default
Enter the keyword default to set the silence period for receiving syslog message
regarding CAM usage for CAM region, slot/portpipe. The default silence period is 0
seconds.
silence-period
silence-period-value
Enter the silence period for stop receiving syslog message for the respective CAM region,
slot/portpipe. The range is from 0 to 65535 seconds.
Command Modes CONFIGURATION
Supported Modes Full-Switch
Command History
Version Description
9.13.0.0 Introduced on the MXL, FN IOM, S5000, S4048-ON, S6000, S6000-ON, S3048-ON,
S3100 Series, C9010, S4048T-ON, Z9500, Z9100-ON, S6100-ON, S6010-ON.
Usage Information
The no cam-threshold command will set the CAM threshold to 90 percent and silence period to 0.
The CAM threshold and silence period conguration is applicable only for Ingress L2, IPv4, IPv6 and Egress L2,
IPv4, and IPv6 ACL CAM groups. For other ACL CAM regions, the CAM threshold and silence period is not
congurable and the values are xed to 90 percent and 0 respectively.
Example
DellEMC(conf)#cam-threshold threshold 2 silence-period 2
DellEMC(conf)#do show running-config | g cam-threshold
cam-threshold threshold 2 silence-period 2
show cam-acl
Display the details of the CAM proles on the chassis and all stack units.
Syntax
show cam-acl
Defaults none
Command Modes EXEC Privilege
Supported Modes Full–Switch
Command History
Version Description
9.9(0.0) Introduced on the FN IOM.
8.3.16.1 Introduced on the MXL 10/40GbE Switch IO Module.
382 Content Addressable Memory (CAM)