Users Guide

debug ip bgp keepalives

Display information about BGP keepalive messages.

Syntax

debug ip bgp [ip-address | peer-group peer-group-name] keepalives [in | out]

To disable debugging, use the no debug ip bgp [ip-address | peer-group peer-group-name]

keepalives [in | out] command.

Parameters

ip-address (OPTIONAL) Enter the IP address of the neighbor in dotted decimal format.

peer-group peer-

group-name

(OPTIONAL) Enter the keyword peer-group then the name of the peer group.

in (OPTIONAL) Enter the keyword in to view only inbound keepalive messages.

out (OPTIONAL) Enter the keyword out to view only outbound keepalive messages.

Command Modes EXEC Privilege

Supported Modes Full–Switch

Command History

Version Description

9.9(0.0) Introduced on the FN IOM.

9.2(0.0) Introduced on the MXL 10/40GbE Switch IO Module.

Usage Information

To remove all congured debug commands for BGP, enter the no debug ip bgp command.

debug ip bgp notications

Allows you to view information about BGP notications received from neighbors.

Syntax

debug ip bgp [ip-address | peer-group peer-group-name] notifications [in | out]

To disable debugging, use the no debug ip bgp [ip-address | peer-group peer-group-name]

notifications [in | out] command.