Users Guide

Version Description
9.2(0.0) Introduced on the MXL 10/40GbE Switch IO Module.
debug ip bgp
Display all information on BGP, including BGP events, keepalives, notications, and updates.
Syntax
debug ip bgp [ip-address | peer-group peer-group-name] [in | out]
To disable all BGP debugging, use the no debug ip bgp command.
Parameters
ip-address Enter the IP address of the neighbor in dotted decimal format.
peer-group peer-
group-name
Enter the keywords peer-group then the name of the peer group to debug.
in (OPTIONAL) Enter the keyword in to view only information on inbound BGP routes.
out (OPTIONAL) Enter the keyword out to view only information on outbound BGP routes.
Command Modes EXEC Privilege
Supported Modes Full–Switch
Command History
Version Description
9.9(0.0) Introduced on the FN IOM.
9.2(0.0) Introduced on the MXL 10/40GbE Switch IO Module.
Usage Information
To view information on both incoming and outgoing routes, do not include the in and out parameters in the
debugging command. The in and out parameters cancel each other; for example, if you enter the debug ip
bgp in
command and then enter the debug ip bgp out command, you do not see information on the
incoming routes.
Entering a no debug ip bgp command removes all congured debug commands for BGP.
Related Commands
debug ip bgp events — views information about BGP events.
debug ip bgp keepalives — views information about BGP keepalives.
debug ip bgp notications — views information about BGP notications.
debug ip bgp updates — views information about BGP updates.
show debugging — views enabled debugging operations.
debug ip bgp dampening
View information on routes being dampened.
Syntax
debug ip bgp dampening [in | out]
310 Border Gateway Protocol IPv4 (BGPv4)