Users Guide

NOTE: If you enter the clear ip bgp ip-address soft command, both
inbound and outbound policies are reset.
in (OPTIONAL) Enter the keyword in to activate only inbound policies.
out (OPTIONAL) Enter the keyword out to activate only outbound policies.
Command Modes EXEC Privilege
Supported Modes Full–Switch
Command History
Version Description
9.9(0.0) Introduced on the FN IOM.
9.2(0.0) Introduced on the MXL 10/40GbE Switch IO Module.
Related Commands
bgp recursive-bgp-next-hop — disables next-hop resolution through other routes learned by the BGP.
bgp soft-recong-backup — turns on BGP Soft Reconguration.
clear ip bgp dampening
Clear information on route dampening and return the suppressed route to the Active state.
Syntax
clear ip bgp dampening [ip-address mask]
Parameters
ip-address mask (OPTIONAL) Enter an IP address in dotted decimal format and the prex mask in slash
format (/x) to clear dampening information only that BGP neighbor.
Command Modes EXEC Privilege
Supported Modes Full–Switch
Command History
Version Description
9.9(0.0) Introduced on the FN IOM.
9.2(0.0) Introduced on the MXL 10/40GbE Switch IO Module.
Usage Information After you enter this command, the software deletes the history routes and returns the suppressed routes to the
Active state.
clear ip bgp ap-statistics
Clear BGP ap statistics, which includes number of aps and the time of the last ap.
Syntax
clear ip bgp flap-statistics [ip-address mask | filter-list as-path-name |
regexp regular-expression]
Parameters
ip-address mask (OPTIONAL) Enter an IP address in dotted decimal format and the prex mask in slash
format (/x) to reset only that prex.
308 Border Gateway Protocol IPv4 (BGPv4)