Users Guide

Command Modes
EXEC
EXEC Privilege
Supported Modes Full–Switch
Command History
Version Description
9.9(0.0) Introduced on the FN IOM.
9.3(0.0) Introduced on the MXL 10/40GbE Switch IO Module platform.
Examples The following sample output shows the line-by-line style display when using the show running-config acl-
vlan-group option. Note that no group or access list names are truncated
Dell#show running-config acl-vlan-group
!
acl-vlan-group Test
member vlan 1-100
ip access-group test in
Dell#show running-config acl-vlan-group Test
!
acl-vlan-group Test
member vlan 1-100
ip access-group test in
acl-vlan-group
Create an ACL VLAN group.
Syntax
acl-vlan-group {group name}
To remove an ACL VLAN group, use the no acl-vlan-group {group name} command.
Parameters
group-name Specify the name of the ACL VLAN group. The name can contain a maximum 140
characters.
Default No default behavior or values
Command Modes CONFIGURATION
Supported Modes Full–Switch
Command History
Version Description
9.9(0.0) Introduced on the FN IOM.
9.3(0.0) Introduced on the MXL 10/40GbE Switch IO Module platform.
Usage Information You can have up to eight dierent ACL VLAN groups at any given time. When you congure an ACL VLAN group,
you enter the ACL VLAN Group Conguration mode.
To avoid the problem of excessive consumption of CAM area, you can congure ACL VLAN groups that combines
all the VLANs that are applied with the same ACL in a single group. A unique identier for each of ACL attached to
the VLAN is used as a handle or locator in the CAM area instead of the VLAN id. This method of processing
signciantly reduces the number of entries in the CAM area and saves memory space in CAM.
Access Control List (ACL) VLAN Groups and Content Addressable Memory (CAM) 273