Users Guide

set tag
To specify a tag for redistributed routes, congure a lter.
Syntax
set tag tag-value
Parameters
tag-value Enter a number as the tag. The range is from zero (0) to 4294967295.
Defaults Not congured.
Command Modes ROUTE-MAP
Supported Modes Full–Switch
Command History
Version Description
9.9(0.0) Introduced on the FN IOM.
8.3.16.1 Introduced on the MXL 10/40GbE Switch IO Module.
Related Commands
set automatic-tag — computes the tag value of the route.
set metric — species the metric value assigned to redistributed routes.
set metric-type — species the route type assigned to redistributed routes.
show cong
Display the current route map conguration.
Syntax
show config
Command Modes ROUTE-MAP
Supported Modes Full–Switch
Command History
Version Description
9.9(0.0) Introduced on the FN IOM.
8.3.16.1 Introduced on MXL 10/40GbE Switch IO Module
Example
Dell(config-route-map)#show config
!
route-map hopper permit 10
Dell(config-route-map)#
show route-map
Display the current route map congurations.
Syntax
show route-map [map-name]
208 Access Control Lists (ACL)