Users Guide

Defaults Not congured.
If you do not dene a keyword (permit or deny) for the route map, the permit action is the default.
Command Modes CONFIGURATION
Supported Modes Full–Switch
Command History
Version Description
9.9(0.0) Introduced on the FN IOM.
8.3.16.1 Introduced on the MXL 10/40GbE Switch IO Module
Usage Information Use caution when you delete route maps because if you do not specify a sequence number, all route maps with the
same map-name are deleted when you use the no route-map map-name command.
Example
Dell(conf)#route-map dempsey
Dell(config-route-map)#
Related Commands show cong2 — displays the current conguration.
set automatic-tag
To automatically compute the tag value of the route, congure a lter.
Syntax
set automatic-tag
To return to the default, use the no set automatic-tag command.
Defaults Not congured.
Command Modes ROUTE-MAP
Supported Modes Full–Switch
Command History
Version Description
9.9(0.0) Introduced on the FN IOM.
8.3.16.1 Introduced on the MXL 10/40GbE Switch IO Module.
Related Commands
set metric — specify the metric value assigned to redistributed routes.
set metric-type — specify the metric type assigned to redistributed routes.
set tag — specify the tag assigned to redistributed routes.
set metric
To assign a new metric to redistributed routes, congure a lter.
Syntax
set metric [+ | -] metric-value
To delete a setting, use the no set metric command.
206 Access Control Lists (ACL)