Users Guide
show diag
View diagnostics information.
Syntax
show diag {information | stack-unit unit-id [detail | summary] | testcase}
Parameters
information Enter the keyword information to view current diagnostics information in the system.
stack-unit unit-id Enter the keyword stack-unit followed by the unit-id to display information on a
specic stack member. The range is from 0 to 5.
detail (OPTIONAL) Enter the keyword detail to view detailed diagnostics information.
summary (OPTIONAL) Enter the keyword summary to view a summary of the diagnostics
information. By default, the summary is displayed.
testcase Enter the keyword testcase to view the list of all the diag tests available.
Defaults Summary
Command Modes EXEC Privilege
Supported Modes All Modes
Command History
Version Description
9.9(0.0) Introduced on the FN IOM.
9.4(0.0) Supported on the FN I/O Aggregator.
Example 1 (show
diag information
Command)
Dell#show diag information
Diag information:
Diag software image version:
9-4(0-180)
--------------------------------------------
Stack-unit Member 0: No Unit diags executed yet
(Stackunit not Offline).
Stack-unit Member 1: Not present.
Stack-unit Member 2: Not present.
Stack-unit Member 3: Not present.
Stack-unit Member 4: Not present.
Stack-unit Member 5: Not present.
--------------------------------------------
Dell#
Example 2 (show
diag stack-unit
Command)
Dell#show diag stackunit 0
Diag status of Stackunit member 0:
-----------------------------------------
Stackunit is currently offline.
Stackunit level0 diag issued at Tue May 15, 2012 11:11:47 AM.
Current diag status: Unit diags are terminated.
Total number of diags: 17
Number of diags performed: 1
Number of diags passed: 1
Number of diags failed: 0
Number of diags pending: 16
Last Test executed: POWERRAILSTATUSTEST
Last notification received at: Tue May 15, 2012 11:12:24 AM
---------------------------------------------------------------
Debugging and Diagnostics 1415