Users Guide

Command History
Version Description
9.9(0.0) Introduced on the FN IOM.
9.6.(0.0) Supported on the FN I/O Aggregator.
9.3(0.0) Supported on the M I/O Aggregator.
Usage Information This command is supported on the M I/O, FN410S, and FN410T Aggregators.
Related Commands
• reload – reboots Dell Networking Operating System (OS).
• show system – displays the status of all stack members or a specic member.
stack-unit provision
Precongure a logical stacking ID of a switch that joins the stack. This is an optional command that is executed on the management unit.
Syntax
stack-unit 0–5] provision {MXL-10/40GbE}
Parameters
0–5 Enter a stack member identier, from 0 to 5, of the switch that you want to add to the
stack.
MXL-10/40GbE Enter the model identier of the switch to be added as a stack member. This identier is
also referred to as the provision type.
Command Modes CONFIGURATION
Supported Modes Full–Switch Mode
Command History
Version Description
9.9(0.0) Introduced on the FN IOM.
8.3.16.1 Introduced on the MXL 10/40GbE Switch IO Module.
Related Commands
• reload — reboots the system.
• show system — displays the status of all stack members or a specic member.
stack-unit renumber
Change the stack member ID of any stack member or a stand-alone unit.
Syntax
stack-unit 0-5 renumber 0-5
Parameters
0-5 The rst instance of this value is the stack member unit identier, from 0 to 5, of the
switch that you want add to the stack. The range is from 0 to 5. The second instance of
this value is the desired new unit identier number.
Defaults none
Command Modes EXEC Privilege
1268 Stacking Commands