Users Guide

priv-password [access access-list-name | ipv6 access-list-name | access-list-
name ipv6 access-list-name]
To remove a user from the SNMP group, use the no snmp-server user name {group_name remote
ip-address udp-port port-number} [1 | 2c | 3] [encrypted] [auth {md5 | sha}
auth-password] [priv des56 | aes128–cfb} priv password] [access access-list-
name | ipv6 access-list-name] command.
Parameters
name Enter the name of the user (not to exceed 20 characters), on the host that connects to
the agent.
group_name Enter a text string (up to 20 characters long) as the name of the group. The following
groups are created for mapping to read/write community/security-names (defaults):
• v1v2creadu — maps to a community with ro permissions.
• 1v2cwriteu — maps to a community rw permissions.
remote ip-address Enter the keywords udp-port then the user datagram protocol (UDP) port number on
the remote device. The range is from 0 to 65535. The default is 162.
udp-port port-
number
Enter the keywords udp-port then the UDP (User Datagram Protocol) port number on
the remote device. The range is from 0 to 65535. The default is 162.
1 | 2c | 3 (OPTIONAL) Enter the security model version number (1, 2c, or 3):
• 1 is the least secure version.
• 3 is the most secure of the security modes.
• 2c allows transmission of informs and counter 64, which allows for integers twice the
width of what is normally allowed.
The default is 1.
encrypted (OPTIONAL) Enter the keyword encrypted to specify the password appear in
encrypted format (a series of digits, masking the true characters of the string).
auth (OPTIONAL) Enter the keyword auth to specify authentication of a packet without
encryption.
md5 | sha (OPTIONAL) Enter the keyword md5 or sha to designate the authentication level.
• md5 — Message Digest Algorithm
• sha — Secure Hash Algorithm
auth-password (OPTIONAL) Enter a text string (up to 20 characters long) password that enables the
agent to receive packets from the host and to send packets to the host. Minimum: eight
characters long.
priv des56 (OPTIONAL) Enter the keywords priv des56 to initiate a privacy authentication level
setting using the CBC-DES privacy authentication algorithm (des56).
aes128 (OPTIONAL) Enter the keyword aes128 to initiate the AES128-CFB encryption
algorithm for transmission of SNMP packets.
priv password (OPTIONAL) Enter a text string (up to 20 characters long) password that enables the
host to encrypt the contents of the message it sends to the agent and decrypt the
contents of the message it receives from the agent. Minimum: eight characters long.
access-list-name (Optional) Enter the standard IPv4 access list name (a string up to 16 characters long).
1242 Simple Network Management Protocol (SNMP) and Syslog