Users Guide

Parameters
rate Enter the rate in frames per second. The range is from 75 to 3000. The default is 75.
Defaults 75 frames per second.
Command Modes CONFIGURATION
Supported Modes Full–Switch Mode
Command History
Version Description
9.9(0.0) Introduced on the FN IOM.
9.2(0.0) Introduced on the MXL 10/40GbE Switch IO Module.
Example
Dell#
Dell#conf
Dell(conf)#protocol-tunnel rate-limit 1000
Dell(conf)#
Related Commands
show protocol-tunnel — displays tunneling information for all VLANs.
show running-cong — displays the current conguration.
show protocol-tunnel
Display protocol tunnel information for all or a specied VLAN-Stack VLAN.
Syntax
show protocol-tunnel [vlan vlan-id]
Parameters
vlan vlan-id (OPTIONAL) Enter the keyword vlan then the VLAN ID to display information for the
one VLAN. The range is from 1 to 4094.
Defaults none
Command Modes EXEC
Supported Modes Full–Switch Mode
Command History
Version Description
9.9(0.0) Introduced on the FN IOM.
9.2(0.0) Introduced on the MXL 10/40GbE Switch IO Module.
Example
Dell#show protocol-tunnel
System Rate-Limit: 75 frames/second
VLAN Protocols Interface
1000 STP,PVST Te 5/7,Te 5/6
1001 LLDP,GVRP Te 5/7,Te 5/6
1002 MMRP,MVRP Te 5/7,Te 5/6
1003 LACP,DOT1X Te 5/7,Te 5/6
1004 OAM,PAUSE Te 5/7,Te 5/6
1005 E-LMI Te 5/7,Te 5/6
Example (Specic
VLAN)
Dell#show protocol-tunnel vlan 2
System Rate-Limit: 1000 Frames/second
Interface Vlan Protocol(s)
1224 Service Provider Bridging