Users Guide

Parameters
time minutes Enter the keywords time then the amount of time in minutes. The range is from 10 to
1440 minutes. The default is 60 minutes
volume rekey-
limit
Enter the keywords volume then the amount of volume in megabytes. The range is from 1
to 4096 to megabytes. The default is 1024 megabytes
Defaults The default time is 60 minutes. The default volume is 1024 megabytes.
Command Modes CONFIGURATION mode
Supported Modes Full–Switch
Command History
This guide is platform-specic. For command information about other platforms, refer to the relevant Dell
Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.9(0.0) Introduced on the FN IOM.
9.7(0.0) Introduced on the S6000–ON.
9.5(0.0) Introduced on the Z9000, S6000, S4820T, S4810, MXL
ip ssh rsa-authentication (Cong)
Enable RSA authentication for the SSHv2 server.
Syntax
ip ssh rsa-authentication enable
To disable RSA authentication, use the no ip ssh rsa-authentication enable command.
Parameters
enable Enter the keyword enable to enable RSA authentication for the SSHv2 server.
Defaults Disabled.
Command Modes CONFIGURATION
Supported Modes Full–Switch
Command History
Version Description
9.9(0.0) Introduced on the FN IOM.
8.3.16.1 Introduced on the MXL 10/40GbE Switch IO Module.
Usage Information
Enabling RSA authentication allows the user to log in without being prompted for a password. In addition, the
OpenSSH compatible SSHv2 RSA public key must be added to the list of authorized keys (ip ssh rsa-
authentication my-authorized-keys device://filename command).
Related Commands ip ssh rsa-authentication (EXEC) — adds keys for RSA authentication.
Security 1191