Users Guide
Version Description
9.5(0.0) Introduced on the MXL.
Related Commands userrole
rate-limit
Congure NAS to allow or reject RADIUS dynamic authorization (DA) packets based on the congurable rate limit value.
Syntax
rate-limit packets per minute
To undo the conguration, enter the no rate-limit command.
Defaults 30 packets per minute.
Parameters
packet per minute Enter the number of packets that you want processed per minute. The range is between
10 to 60 packets per minute.
Command Modes
• CONF-DYNAMIC-AUTH
Usage Information
• Packets are dropped after number of packets reaches the congured rate-limit.
Command History
This guide is platform-specic. For command information about other platforms, see the relevant Dell EMC
Networking OS Command Line Reference Guide.
The following is a list of the Dell EMC Networking OS version history for this command.
Version Description
9.13(0.0) Introduced on the C9010, S3100, S3048–ON, S4048T-ON, S4048–ON, S5000, S6010–
ON, S6000–ON, S6100–ON, S6000, Z9100–ON, Z9500, FN-IOM, and MXL.
replay-protection-window
Congure replay protection window period to drop the duplicate packets.
Syntax
replay-protection-window minutes
To undo the conguration, enter the no replay-protection-window command.
Defaults 5 Minutes.
Parameters
minutes Enter the number of minutes to drop the packets. The range is from 1 to 10 minutes.
Command Modes
• CONF-DYNAMIC-AUTH
Security 1177