Users Guide

If you congure the key parameter in the radius-server host command, the key congured with the
radius-server key command is the default key for all RADIUS communications.
Related Commands radius-server host — congures a RADIUS host.
radius-server retransmit
Congure the number of times the switch attempts to connect with the congured RADIUS host server before declaring the RADIUS host
server unreachable.
Syntax
radius-server retransmit retries
To congure zero retransmit attempts, use the no radius-server retransmit command.
To return to the default setting, use the radius-server retransmit 3 command.
Parameters
retries Enter a number of attempts that Dell Networking Operating System (OS) tries to locate a
RADIUS server. The range is from zero (0) to 100. The default is 3 retries.
Defaults 3 retries
Command Modes CONFIGURATION
Supported Modes All Modes
Command History
Version Description
9.9(0.0) Introduced on the FN IOM.
9.4(0.0) Supported on the FN I/O Aggregator.
9.3(0.0) Supported on the M I/O Aggregator.
Related Commands radius-server host — congures a RADIUS host.
radius-server timeout
To reply to a request, congure the amount of time the RADIUS client (the switch) waits for a RADIUS host server .
Syntax
radius-server timeout seconds
To return to the default value, use the no radius-server timeout command.
Parameters
seconds Enter the number of seconds between an unsuccessful attempt and the radius-server
timeout times out. The range is from zero (0) to 1000 seconds. The default is 5 seconds.
Defaults 5 seconds
Command Modes CONFIGURATION
Supported Modes All Modes
Security 1175