Users Guide

Supported Modes Full–Switch
Command History
Version Description
9.9(0.0) Introduced on the FN IOM.
8.3.16.1 Introduced on the MXL 10/40GbE Switch IO Module.
rmon event
Add an event in the RMON event table.
Syntax
rmon event number [log] [trap community] [description string] [owner name]
To disable RMON on an interface, use the no rmon event number command.
Parameters
number Assign an event number in integer format from 1 to 65535. The number value must be
unique in the RMON event table.
log (OPTIONAL) Enter the keyword log to generate an RMON log entry. The log entry is
triggered and sets the eventType in the RMON MIB to log or log-and-trap. The default is
No log.
trap community (OPTIONAL) Enter the keyword trap then an SNMP community string to congure the
eventType setting in the RMON MIB. This keyword sets either snmp-trap or log-and-trap.
The default is public.
description string (OPTIONAL) Enter the keyword description then a string describing the event.
owner name (OPTIONAL) Enter the keyword owner then the name of the owner of this event.
Defaults As noted in the Parameters section.
Command Modes CONFIGURATION
Supported Modes Full–Switch
Command History
Version Description
9.9(0.0) Introduced on the FN IOM.
8.3.16.1 Introduced on the MXL 10/40GbE Switch IO Module.
rmon hc-alarm
Set an alarm on any MIB object.
Syntax
rmon hc-alarm number variable interval {delta | absolute} rising-threshold
value event-number falling-threshold value event-number [owner string]
To disable the alarm, use the no rmon hc-alarm number command.
Parameters
number Enter the alarm integer number from 1 to 65535. The value must be unique in the RMON
alarm table.
Remote Monitoring (RMON) 1121