Users Guide

Version Description
8.3.16.1 Introduced on the MXL 10/40GbE Switch IO Module.
Related Commands ip split-horizon — sets the RIP routing updates to exclude routing prexes.
ip rip receive version
To receive specic versions of RIP, set the interface. The RIP version you set on the interface overrides the version command in ROUTER
RIP mode.
Syntax
ip rip receive version [1] [2]
To return to the default, use the no ip rip receive version command.
Parameters
1 (OPTIONAL) Enter the number 1 for RIP version 1.
2 (OPTIONAL) Enter the number 2 for RIP version 2.
Defaults RIPv1 and RIPv2
Command Modes INTERFACE
Supported Modes Full–Switch
Command History
Version Description
9.9(0.0) Introduced on the FN IOM.
8.3.16.1 Introduced on the MXL 10/40GbE Switch IO Module.
Usage Information If you want the interface to receive both versions of RIP, use the ip rip receive version 1 2 command.
Related Commands
ip rip send version — sets the RIP version for sending RIP trac on an interface.
version — sets the RIP version the switch software uses.
ip rip send version
To send a specic version of RIP, set the interface. The version you set on the interface overrides the version command in ROUTER RIP
mode.
Syntax
ip rip send version [1] [2]
To return to the default value, use the no ip rip send version command.
Parameters
1 (OPTIONAL) Enter the number 1 for RIP version 1. The default is RIPv1.
2 (OPTIONAL) Enter the number 2 for RIP version 2.
Defaults RIPv1
Command Modes INTERFACE
Supported Modes Full–Switch
1108 Routing Information Protocol (RIP)