Users Guide

mask If you enter an IP address, also enter a mask for that IP address, in either dotted decimal

format or /prex format (/x).

prex-name (OPTIONAL) Enter a congured prex list name.

Defaults weight = 120

Command Modes ROUTER RIP

Supported Modes Full–Switch

Command History

Version Description

9.9(0.0) Introduced on the FN IOM.

8.3.16.1 Introduced on the MXL 10/40GbE Switch IO Module.

Related Commands default-metric — assigns one distance metric to all routes learned using the redistribute command.

distribute-list in

Congure a lter for incoming routing updates.

Syntax

distribute-list prefix-list-name in [interface]

To delete the lter, use the no distribute-list prefix-list-name in command.

Parameters

prex-list-name Enter the name of a congured prex list.

interface (OPTIONAL) Identies the interface type slot/port as one of the following:

• For a Port Channel interface, enter the keywords port-channel then a number.

The range is from 1 to 128.

• For a 10-Gigabit Ethernet interface, enter the keyword TenGigabitEthernet then

the slot/port information.

•

For a VLAN, enter the keyword vlan then a number from 1 to 4094.

Defaults Not congured.