Users Guide
trigger (OPTIONAL) Enter the keyword trigger to debug only RIP trigger extensions.
Command Modes EXEC Privilege
Supported Modes Full–Switch
Command History
Version Description
9.9(0.0) Introduced on the FN IOM.
8.3.16.1 Introduced on the MXL 10/40GbE Switch IO Module.
default-information originate
Generate a default route for the RIP trac.
Syntax
default-information originate [always] [metric metric-value] [route-map map-
name]
To return to the default values, use the no default-information originate command.
Parameters
always (OPTIONAL) Enter the keyword always to enable the switch software to always
advertise the default route.
metric metric-value (OPTIONAL) Enter the keyword metric then a number as the metric value. The range is
from 1 to 16. The default is 1.
route-map map-
name
(OPTIONAL) Enter the keywords route-map then the name of a congured route-map.
Defaults Disabled. Metric: 1.
Command Modes ROUTER RIP
Supported Modes Full–Switch
Command History
Version Description
9.9(0.0) Introduced on the FN IOM.
8.3.16.1 Introduced on the MXL 10/40GbE Switch IO Module.
Usage Information The default route must be present in the switch routing table for the default-information originate
command to take eect.
default-metric
Change the default metric for routes. To ensure that all redistributed routes use the same metric value, use this command with the
redistribute command.
Syntax
default-metric number
To return the default metric to the original values, use the no default-metric command.
1104 Routing Information Protocol (RIP)