Users Guide

Related Commands
qos dscp-color-map — associates the DSCP color map prole with an interface so that all IP packets received on
it is given a color based on that color map
dscp — sets the number of specic DSCP values for color map prole to yellow or red.
qos dscp-color-policy
Associates the DSCP color map prole with an interface so that all IP packets received on it is given a color based on that color map.
Syntax
dscp-color-policy color-map-profile-name
To remove a color policy map prole, use the no dscp-color-policy color-map-profile-name
command.
Parameters
color-map-prole-
name
Enter the color map prole name. The name can have a maximum of 32 characters.
Defaults None
Command Modes CONFIG-INTERFACE
Supported Modes Full–Switch
Command History
This guide is platform-specic. For command information about other platforms, refer to the relevant Dell
Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.9(0.0) Introduced on the FN IOM.
9.7(0.0) Introduced on the S6000-ON.
Version 9.5.0.0 Introduced on the Z9000, S6000, S4820T, S4810, and MXL.
Usage Information If the specied color-map does not exist, the Diserv Manager (DSM) creates a color map and sets all the DSCP
values to green (low drop precedence).
Example
The following example assigns the color map, bat-enclave-map, to interface.
Related Commands
dscp — sets the number of specic DSCP values for color map prole to yellow or red.
qos dscp-color-map — congures the DSCP color map.
show qos dscp-color-policy
Display DSCP color policy conguration for one or all interfaces.
Syntax
show qos dscp-color-policy {summary [interface] | detail {interface}}
1098 Quality of Service (QoS)