Users Guide
private-vlan mapping secondary-vlan
Map secondary VLANs to the selected primary VLAN.
Syntax
[no] private-vlan mapping secondary-vlan vlan-list
To remove specic secondary VLANs from the conguration, use the no private-vlan mapping
secondary-vlan vlan-list command syntax.
Parameters
vlan-list Enter the list of secondary VLANs to associate with the selected primary VLAN. The list
can be in comma-delimited or hyphenated-range format, following the convention for the
range input.
Defaults none
Command Modes INTERFACE VLAN
Supported Modes Full—Switch
Command History
Version Description
9.9(0.0) Introduced on the FN IOM.
8.3.16.1 Introduced on the MXL 10/40GbE Switch IO Module.
Usage Information The list of secondary VLANs can be:
• Specied in comma-delimited or hyphenated-range format.
• Specied with this command even before they have been created.
• Amended by specifying the new secondary VLAN to be added to the list.
Related Commands
private-vlan mode — sets the mode of the selected VLAN to community, isolated, or primary.
show interfaces private-vlan — displays the type and status of the PVLAN interfaces.
show vlan private-vlan — displays the PVLANs and/or interfaces that are part of a PVLAN.
show vlan private-vlan mapping — displays the primary-secondary VLAN mapping.
switchport mode private-vlan — sets PVLAN mode of the selected port.
private-vlan mode
Set PVLAN mode of the selected VLAN to community, isolated, or primary.
Syntax
[no] private-vlan mode {community | isolated | primary}
To remove the PVLAN conguration, use the no private-vlan mode {community | isolated |
primary} command syntax.
Parameters
community Enter the keyword community to set the VLAN as a community VLAN.
1044 Private VLAN (PVLAN)