Deployment Guide

• ipv6 pim join-lter
• ipv6 pim query-interval
• ipv6 pim neighbor-lter
• ipv6 pim register-lter
• ipv6 pim rp-address
• ipv6 pim rp-candidate
• ipv6 pim sparse-mode
• ipv6 pim spt-threshold
• show ipv6 pim bsr-router
• show ipv6 pim interface
• show ipv6 pim neighbor
• show ipv6 pim rp
• show ipv6 pim tib
IPv4 PIM-Sparse Mode Commands
The following describes the IPv4 PIM-sparse mode (PIM-SM) commands.
clear ip pim rp-mapping
The bootstrap router (BSR) feature uses this command to remove all or particular rendezvous point (RP) advertisement.
Syntax
clear ip pim rp-mapping rp-address
Parameters
rp-address (OPTIONAL) Enter the RP address in dotted decimal format (A.B.C.D).
Command Modes EXEC Privilege
Supported Modes Full—Swtich
Command History
Version Description
9.9(0.0) Introduced on the FN IOM.
9.2(0.0) Introduced on the MXL 10/40GbE Switch IO Module.
clear ip pim tib
Clear PIM tree information from the PIM database.
Syntax
clear ip pim tib [group]
Parameters
group (OPTIONAL) Enter the multicast group address in dotted decimal format (A.B.C.D).
Command Modes EXEC Privilege
Supported Modes Full—Swtich
PIM-Sparse Mode (PIM-SM) 993