Deployment Guide

PIM-Sparse Mode (PIM-SM)
The protocol-independent multicast (PIM) commands are supported by the Dell Networking Operating System (OS).
This chapter contains the following sections:
• IPv4 PIM-Sparse Mode Commands
• IPv6 PIM-Sparse Mode Commands
Topics:
• IPv4 PIM-Sparse Mode Commands
• clear ip pim rp-mapping
• clear ip pim tib
• debug ip pim
• ip pim bsr-border
• ip pim bsr-candidate
• ip pim dr-priority
• ip pim join-lter
• ip pim ingress-interface-map
• ip pim neighbor-lter
• ip pim query-interval
• ip pim register-lter
• ip pim rp-address
• ip pim rp-candidate
• ip pim sparse-mode
• ip pim sparse-mode sg-expiry-timer
• ip pim spt-threshold
• no ip pim snooping dr-ood
• show ip pim bsr-router
• show ip pim interface
• show ip pim neighbor
• show ip pim rp
• show ip pim snooping interface
• show ip pim snooping neighbor
• show ip pim snooping tib
• show ip pim summary
• show ip pim tib
• show running-cong pim
• IPv6 PIM-Sparse Mode Commands
• ipv6 pim bsr-border
• ipv6 pim bsr-candidate
• ipv6 pim dr-priority
44
992 PIM-Sparse Mode (PIM-SM)