Deployment Guide

route-map map-
name
(OPTIONAL) Enter the keywords route-map then the name of an established route
map. If the route map is not congured, the default is deny (to drop all routes).
tag tag-value
(OPTIONAL) Enter the keyword tag to set the tag for routes redistributed into OSPFv3.
The range is from 0 to 4294967295
The default is 0.
Defaults Not congured.
Command Modes
ROUTER OSPF for OSPFv2
ROUTER OSPFv3 for OSPFv3
Supported Modes Full–Switch
Command History
Version Description
9.9(0.0) Introduced on the FN IOM.
9.2(0.0) Added support for OSPFv3.
8.3.16.1 Introduced on the MXL 10/40GbE Switch IO Module.
Usage Information
To redistribute the default route (x:x:x:x::x), use the default-information originate command.
Related Commands
default-information originate — generates a default route into the OSPF routing domain.
router-id
Designate a xed router ID.
Syntax
router-id ip-address
To return to the previous router ID, use the no router-id ip-address command.
Parameters
ip-address
Enter the router ID in the dotted decimal format.
Defaults The router ID is selected automatically from the set of IPv4 addresses congured on a router.
Command Modes ROUTER OSPFv3 for OSPFv3
Supported Modes Full–Switch
Command History
Version Description
9.9(0.0) Introduced on the FN IOM.
9.2(0.0) Added support for OSPFv3.
8.3.16.1 Introduced on the MXL 10/40GbE Switch IO Module.
Open Shortest Path First (OSPFv2 and OSPFv3) 977