Deployment Guide

ip msdp shutdown
Administratively shut down a congured MSDP peer.
Syntax
ip msdp shutdown {peer address}
Parameters
peer address Enter the peer address in a dotted decimal format (A.B.C.D.).
Defaults Not congured.
Command Modes CONFIGURATION
Supported Modes Full–Switch
Command History
Version Version
9.9(0.0) Introduced on the FN IOM.
9.2(0.0) Introduced on the MXL 10/40GbE Switch IO Module.
ip multicast-msdp
Enable MSDP.
Syntax
ip multicast-msdp
To exit MSDP, use the no ip multicast-msdp command.
Defaults Not congured.
Command Modes CONFIGURATION
Supported Modes Full–Switch
Command History
Version Description
9.9(0.0) Introduced on the FN IOM.
9.2(0.0) Introduced on the MXL 10/40GbE Switch IO Module.
show ip msdp
Display the MSDP peer status, SA cache, or peer summary.
Syntax
show ip msdp {peer peer address | sa-cache | summary}
Parameters
peer peer address Enter the keyword peer then the peer address in a dotted decimal format (A.B.C.D.).
sa-cache Enter the keywords sa-cache to display the Source-Active cache.
summary Enter the keyword summary to display an MSDP peer summary.
Defaults Not congured.
Multicast Source Discovery Protocol (MSDP) 863